Ultrasonic detector gas leakage detector V2+ product with thermal imaging camera function.
This is KMS1000-V2+IR.

When using the thermal imaging camera function on V2+IR, the thermal imaging camera with 640×480 pixels of high quality and displayed entirely on a large screen can be viewed on the full screen.
The KMS1000-V2+IR product is suitable to find the leakage point of other thermometers with a careful temperature sensor.

The frequency range of sound waves that can be felt by the sound of a person's ears is usually between 16 Hz and 20 kHz,

and the audible frequency that a person can hear is between 16 Hz and 20,000 Hz.
You can also use various accessories on site.

Friction occurs due to turbulence caused by leakage of compressed air from high pressure inside the compressed air pipe to low pressure outside, and ultrasonic waves generated by leakage cannot be heard by human ears.
So, if you use this product to find the leakage point through ultrasonic waves, you can check it with your eyes and find the exact spot.

The KMS1000-V2+IR combines the functions of ultrasonic waves and cameras to visually check the leakage area and find the leakage point.
It is a product that can detect leakage from a long distance and can also check leakage of areas that are difficult to access through various sensors.
It can be used regardless of gas type because it shares leakage information with the imaging function and detects leakage through ultrasonic waves.
KMS1000-V2+IR, a highly sophisticated leakage shooter, measures ultrasonic waves at the point where gas leakage occurs to determine the exact leakage point.
The camera technology is combined with the existing ultrasonic detector to locate where leakage occurs, and if you touch the camera, you can see the target directly on the display.
The leakage point is found together through a bar marked with dB at the bottom of the screen indicating the amount of ultrasonic RMS.

If the leakage point appears to be a circular cross at first, but finds a more accurate point, the target color changes and the target mark becomes a more accurate point.
You can take and save the leakage point and upload the photo directly to your PC using USB cable.
You can also use various accessories on site.​​

Ultrasonic detector gas leakage detector V2+ product with thermal imaging camera function.
This is KMS1000-V2+IR.

When using the thermal imaging camera function on V2+IR, the thermal imaging camera with 640×480 pixels of high quality and displayed entirely on a large screen can be viewed on the full screen.
The KMS1000-V2+IR product is suitable to find the leakage point of other thermometers with a careful temperature sensor.

The frequency range of sound waves that can be felt by the sound of a person's ears is usually between 16 Hz and 20 kHz,

and the audible frequency that a person can hear is between 16 Hz and 20,000 Hz.
You can also use various accessories on site.

Friction occurs due to turbulence caused by leakage of compressed air from high pressure inside the compressed air pipe to low pressure outside, and ultrasonic waves generated by leakage cannot be heard by human ears.
So, if you use this product to find the leakage point through ultrasonic waves, you can check it with your eyes and find the exact spot.

The KMS1000-V2+IR combines the functions of ultrasonic waves and cameras to visually check the leakage area and find the leakage point.
It is a product that can detect leakage from a long distance and can also check leakage of areas that are difficult to access through various sensors.
It can be used regardless of gas type because it shares leakage information with the imaging function and detects leakage through ultrasonic waves.
KMS1000-V2+IR, a highly sophisticated leakage shooter, measures ultrasonic waves at the point where gas leakage occurs to determine the exact leakage point.
The camera technology is combined with the existing ultrasonic detector to locate where leakage occurs, and if you touch the camera, you can see the target directly on the display.
The leakage point is found together through a bar marked with dB at the bottom of the screen indicating the amount of ultrasonic RMS.

If the leakage point appears to be a circular cross at first, but finds a more accurate point, the target color changes and the target mark becomes a more accurate point.
You can take and save the leakage point and upload the photo directly to your PC using USB cable.
You can also use various accessories on site.​​