DiH® Space Sterilization Equipment First Developed in the World

What is DiHPAE?

□ DiHPAE (Dry Ionized Hydrogen Peroxide Aerosol Equipment)

☞ Hydrogen peroxide ionization dry fog generation equipment

□ Features of DiH_M Model

1. Equipment that removes(sterilizes) microbial contamination at the level of 6 Log on target space and surface using dry-fog type aerosol(dry fog) generated by spraying hydrogen peroxide solution with air with nozzles.

2. Equipment that can increase the effectiveness of sterilization by ionizing aerosols by applying 17.4KV atmospheric discharge to hydrogen peroxide aerosols.

3. Equipment that can prevent condensation of hydrogen peroxide aerosol by applying humidity-reactive injection control and hydrogen peroxide injection driving signal control technology.

4. Equipment that facilitates portability and mobility and that can perform both surface sterilization and space sterilization.

5. Equipment for sterilizing with hydrogen peroxide in hydrogen peroxide solution using 6.5% to 35% concentration.

6. Automated control equipment consisting of the main body and two PODs.

7. Equipment that can be remotely controlled through remote control or the Internet.

8. Equipment that can adjust the amount of dispensing or resting time depending on the target or environment.

9. Equipment that can store digital information(time, temperature, humidity, etc.) of the sterilization process

10. Equipment with functions to control scrubber(hydrogen peroxide giving up device)

11. Equipment for application of scrubber control technology with a positive catalyst filter for hydrogen peroxide decomposition

Function and specification of the DiHPAE DiH_M model

□ Main body

1) Compressor air release pressure: 1 to 1.5 bar

2) Volume of solution injection: 20 ml/min to 40 ml/min

3) Monitor: 7" or higher LCD touch monitor

4) Operating computer

A) Main board: Raspberry-Pi

B) Operating Software: Rasbian

C) External hard drive: MicroSD 16G byte or higher

5) Attachment sensor: Temperature and humidification censors

6) Input power: 220V

7) Size: 626 X 492 X 350 mm ± 30 mm

8) Weight: 30 kg or less

□ Disposable device

1) Spray aerosol size: not more than 10um

2) Plasma Voltage: 17.4KV ±2KV

3) Size: 284.5 X 97 X 120 mm ± 30 mm

4) Weight: 2.5 kg/less than

5) Connection length: 5m or less

□ Space sterilization performance

1) Level of microbial decontamination: Maximum 6 Log( ).

2) Time required: 50 minutes or less for sterilization of 104㎥ space. (Based on injection and rest time / excluding aeration time)

3) Disinfection/sterilization conditions of surface bacteria

A) Dispensing: Approximately 5 seconds per square foot.

B) Contact time: About 7 minutes

4) Bacteria subject to microbial decontamination: fungi, pneumonia, multidrug resistant bacteria, etc.

A) Mold bacteria

Aspergillus brasiliensis ATCC 9642

Penicillicem pinophilum ATCC 11797

Chaetomium globosum ATCC 6205

Aureobasidkum pululans ATCC 15233

B) Pneumonia bacillus

Klebsiella pneumoniae ATCC 4352

C) Supervirus

MRSA (Staphylococcus aureus subsp. aureus ATCC 3359)

※ The above figures and product types may be changed during the manufacturing process. 

DiH® Space Sterilization Equipment First Developed in the World

What is DiHPAE?

□ DiHPAE (Dry Ionized Hydrogen Peroxide Aerosol Equipment)

☞ Hydrogen peroxide ionization dry fog generation equipment

□ Features of DiH_M Model

1. Equipment that removes(sterilizes) microbial contamination at the level of 6 Log on target space and surface using dry-fog type aerosol(dry fog) generated by spraying hydrogen peroxide solution with air with nozzles.

2. Equipment that can increase the effectiveness of sterilization by ionizing aerosols by applying 17.4KV atmospheric discharge to hydrogen peroxide aerosols.

3. Equipment that can prevent condensation of hydrogen peroxide aerosol by applying humidity-reactive injection control and hydrogen peroxide injection driving signal control technology.

4. Equipment that facilitates portability and mobility and that can perform both surface sterilization and space sterilization.

5. Equipment for sterilizing with hydrogen peroxide in hydrogen peroxide solution using 6.5% to 35% concentration.

6. Automated control equipment consisting of the main body and two PODs.

7. Equipment that can be remotely controlled through remote control or the Internet.

8. Equipment that can adjust the amount of dispensing or resting time depending on the target or environment.

9. Equipment that can store digital information(time, temperature, humidity, etc.) of the sterilization process

10. Equipment with functions to control scrubber(hydrogen peroxide giving up device)

11. Equipment for application of scrubber control technology with a positive catalyst filter for hydrogen peroxide decomposition

Function and specification of the DiHPAE DiH_M model

□ Main body

1) Compressor air release pressure: 1 to 1.5 bar

2) Volume of solution injection: 20 ml/min to 40 ml/min

3) Monitor: 7" or higher LCD touch monitor

4) Operating computer

A) Main board: Raspberry-Pi

B) Operating Software: Rasbian

C) External hard drive: MicroSD 16G byte or higher

5) Attachment sensor: Temperature and humidification censors

6) Input power: 220V

7) Size: 626 X 492 X 350 mm ± 30 mm

8) Weight: 30 kg or less

□ Disposable device

1) Spray aerosol size: not more than 10um

2) Plasma Voltage: 17.4KV ±2KV

3) Size: 284.5 X 97 X 120 mm ± 30 mm

4) Weight: 2.5 kg/less than

5) Connection length: 5m or less

□ Space sterilization performance

1) Level of microbial decontamination: Maximum 6 Log( ).

2) Time required: 50 minutes or less for sterilization of 104㎥ space. (Based on injection and rest time / excluding aeration time)

3) Disinfection/sterilization conditions of surface bacteria

A) Dispensing: Approximately 5 seconds per square foot.

B) Contact time: About 7 minutes

4) Bacteria subject to microbial decontamination: fungi, pneumonia, multidrug resistant bacteria, etc.

A) Mold bacteria

Aspergillus brasiliensis ATCC 9642

Penicillicem pinophilum ATCC 11797

Chaetomium globosum ATCC 6205

Aureobasidkum pululans ATCC 15233

B) Pneumonia bacillus

Klebsiella pneumoniae ATCC 4352

C) Supervirus

MRSA (Staphylococcus aureus subsp. aureus ATCC 3359)

※ The above figures and product types may be changed during the manufacturing process.